The two most popular varieties of radon mitigation systems are crucial to know. To evaluate radon levels, buy a kit or contact a radon testing business. If you don’t know what they are or if it has been over a decade since your last test, you must consult mitigation testing providers for further information. It’s time to install or update your radon reduction equipment if it’s higher than 4  pCi/L.

The quantity of radon in your house decreases using radon mitigation systems. Tasteless and odorless is radon. Even so, radon continues to pose a severe threat. It is the second cause of lung cancer before smoking. 

To protect the family 

  •  It is vital to ensure your house or place of business has an adequate radon mitigation system.

To know how passive and active radon systems work the best method is to select a radon mitigation system.

Active Vs Passive Radon Mitigation

  • Passive and active radon mitigation devices are used to vent radon gas out of the house. 
  • If you recently tested for radon in your house and found higher concentrations then you need some mitigation equipment.

Which method is best for you? Passive and active radon mitigation systems to provide an answer to that query. 

 Active Radon Mitigation

Radon gases are drawn out from beneath homes by a fan in active soil by depressurization systems. 

  • It is the only kind of system advised for homes already built and is significantly more effective than a passive system.
  • A vent pipe in an active radon mitigation system extends from the earth beneath the lowest part of the house to above the roof outside the structure. 
  • It also includes an electric vent blower and monitoring system. 
  • The fan runs continuously on this permanent arrangement, requiring little upkeep. 
  • The fans typically last seven to ten years and draw approximately 75 watts.

Passive Radon Mitigation

Similar to active systems, passive radon systems do not have a fan. This radon mitigation device creates an airflow and expels radon using the natural pressure differential. 

  • The best option for mitigating radon in new construction that cannot yet test is a passive system, which works well in homes with low radon levels but is ineffective against greater gas concentrations.
  •  Studies have shown that a passive system will not reduce radon levels in homes with high radiation levels to tolerable levels more than 70% of the time.

What's Ideal for Your House?

Active mitigation becomes the most effective strategy to lower those levels. Installing a radon fan has few drawbacks because fans are long-lasting, silent, and energy-efficient.

  • Implement a passive radon mitigation system if radon is below 4 pCi/L but high enough above zero to cause you concern.
  •  If you ever require stronger mitigation, you can upgrade your passive system with a radon fan.

The first step is to select the best radon mitigation system for you. Whether it is passive or active. 

You should always conduct a test on your home for radon. After you are sure about radon levels in your house, the finest radon mitigation system you can select to finish the job. 

Leave a Reply

Your email address will not be published. Required fields are marked *